How To Use Your Dishwasher - KitchenAid Sculptura KUDS24SE Use & Care Manual

_sing your new KITCHENAID* dishwasher is simple. Follow the steps below to
get
Started.
For more information on
specific steps
and additional
safety information,
see
the
page(s)
next to the step you would like to know more about.
NOTE: Before using your dishwasher, remove all hang tags, temporary labels, and pack-
aging materials. Please also read the entire Use and Care Guide as it contains important
operating and safety information.
How to use your dishwasher
1. Load the dishwasher. See pages 8-13. 5. Push door firmly when closing.
2. Spin the upper spray arm. It should tum
freely. Check the
lower spray arm
also to make sure
it turns freely.
6. Run hot water at sink nearest dishwasher
until water is hot. Turn
off water. See page 22.
3.Add detergent. See pages 15 and 16.
7. Press the desired Wash Selection pad.
See the "Cycle
selection chart" on
page 18. Then press
the desired Option(s)
pad(s). See page 19
for "Option selections."
L.,
4. Add rinse agent if needed. See page 17.
8. Press the Start pad. The cycle will begin (if
Delay Hours has not
been selected).
NOTE: The dishwasher
remembers the last
cycle and option(s) you
selected. You only have
to press the Start pad if
you want to use the same
cycle and option(s).