Grate; Cooktop Controls - KitchenAid ARCHITECT KGRS807 Use & Care Manual

Use the following chart as a guide when setting heat levels.
SETTING RECOMMENDED USE
HI • Start food cooking.
• Bring liquid to a boil.
Medium High • Hold a rapid boil.
between
MED and HI • Quickly brown or sear food.
MED (Medium) • Hold a slow boil.
• Fry poultry or meat.
Medium Low • Stew or steam food.
between
MED and LO • Cook pudding, sauce, icing or
gravy.
LO • Keep food warm.
• Simmer.
......... g
....... C
A. Wok supports pointing down (for use
with flat-bottomed cookware)
B. Cooktop grate with/nstaWok
TM
Grate
insert (left side of range only)
C. Reversible InstaWok
TM
Grate insert
The TripleTier ®Flame Burner with InstaWok
TM
Grate is a
multifunction burner that produces everything from a rapid boil
down to a low simmer.
The TripleTier ® Flame Burner with InstaWok
TM
Grate is functioned
by a dual valve control knob, which controls 2 separate burners.
See "TripleTier ® Burner with High Power Burner and Low Power
Simmer Settings" in the "Cooktop Controls" section.
The InstaWok
TM
Grate supports 12" to 14" (30.5 cm to 35.6 cm)
Wok pans and can be flipped over to become a flat grate for use
with flat-bottomed cookware.
IMPORTANT: The InstaWok
TM
Grate must be in place when you
are using the TripleTier ® Flame Burner.
To Use the InstaWok
TM
Grate:
1. Check that the control knob is in the OFF position and the
grate is completely cool before handling.
2. Remove grate from cooktop and flip the grate over so that the
wok supports are pointing up.
..... C
A. Wok supports pointing up
B. Cooktop grate with InstaWok
TM
Grate
insert (left side of range only)
C. Reversible InstaWok
TM
Grate insert
3. Place the wok grate within the supports.
b(:!t_?_:td
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner Cap Alignment
Always keep the burner cap properly fitted in place when using a
surface burner. A clean burner cap will help avoid poor ignition
and uneven flames. Always clean the burner cap after a spillover
and routinely remove and clean the caps according to the
"General Cleaning" section.
TripleTier _ Flame Burner
O ....
A. TripleTier ®flame burner caps
B. Burner base
C. Alignment pins
D. Igniter
E. Gas tube opening