Monogramming; Q Embroidery - Sears Kenmore 385.17824090 Owner's Manual

Monogramming
S_t the Machine
Top thread tension
control 2 to O
F" Satin stitch
toot
Stitch width
control5
i 2 3 4
©
Stitch length
control 0.5 to I
Stretch Stitch
34
Hera_s How
1.
2.
3,
4.
5.
Set the same as satin stitch.
Back the fabric w_th paper or
mterfacing,
Draw the letters on the fabric
with tailor's chalk.
Satin stitch, adjusting the stitch
width as necessary to form each
pa_ern,
If using paper, carefully remove it
when you have finished sewing.
Embroidery
Set the Machine
Stitch width
control "1to5
lop thread tension
control 2 to 6
NO presser
foot
Stltch length control
AnV number (not
necessary to adjust)
Stretch Stltch
DarNin
Here's How
1. Put the darning plate on the needle
plate (see page 29),
2. Remove foot holder (see page 10),
3, Adjust the stitch wtdth as desired
(see page 2j).
4. Draw the design on to the fabric
w_th tailor's chalk.
5. Stretch the fabric between embrot-
dery hoops and place under the
needle,
6.
7,
Lower the presser foot lever to
engage the top thread tension,
Holding the top thread in your left
hand, rotate the hand wheel toward
you one complete turn.
Pull the top thread to draw the
bobbin thread through to the surface
of the fabric.
8. Using a medium speed, stitch along
the marked outline, gufding the
fabric carefully by hand.