Presser Foottypes - Sears Kenmore 385.17824090 Owner's Manual

.
Presser Foot Types
Zigzag Foot
Straight Foot
To Snap On
Gr°°ve _ Pi_n
To Snap On the Presser Foot:
1. Place the presser foot so the hori-
zontal pin on the foot Hes just
under the groove of the foot
holder,
2. Lower the presser foot holder to
lock the presser foot in place.
NOTE: If you do not hear the
presser foot snap in place,
t3ress down on the presser
foot holder firmly until you
hear the snap.
A: Zigzag foot
Use this foot for both straight and zigzag
stitching.
Uses: Zigzag stitching (see page 31),
Bar tacking (see page 33),
Button sewing {see page 35),
Rick-rack stretch (see page 36),
Three-step zigzag (see page 37),
Overcast stretch (see page 38),
Lace work !see page 40},
Two-polnt shell stitching
Isee page 50),
Smocking (see page 51),
Stretch patching (see page 51),
Fagoting (see page 52),
Herring bone stretch (see page 52),
Elastic stretch {see page 53),
Box stitching {see page 53),
Two-point box stitch (see page 54),
Overedging stitch {seepage 54).
H: Stra=ght foot
Use this foot exclusively for straightstitching
using center needle position only.
Uses: Stralght stitching Isee page 2__8),
Topstitching (see page 2_99),
Straight stretch (see page 30).
11