Advertisement
S
PECIFICATIONS
SERIAL CONTROL INTERFACE
Port number/type
IPL T SF24.............................. 2 RS-232/RS-422/RS-485
IPL T SFI244 .......................... 2 RS-232 only
Connectors
IPL T SF24.............................. (2) 9-pin male D and (1) 3.5 mm
IPL T SFI244 .......................... (1) 3.5 mm 5-pole captive screw
Baud rate and protocol .............. 300 to 115200 baud
Pin configurations
Serial, 9-pin D
RS-232 (default)................ 2 = RX, 3 = TX, 5 = GND, 7 = RTS,
RS-422 .............................. 2 = RX-, 3 = TX-, 5 = GND,
RS-485................................ 2&3 = data- and tie 2&3,
Serial, 5-pole captive screw.... COM1: pin 1 = TX, 2 = RX, 3 = GND
Program control ............................ Extron's Simple Instruction
Global Viewer requirements .......... Microsoft
ETHERNET CONTROL INTERFACE
Connectors ................................ 1 RJ-45 male connector
Data rate .................................. 10/100Base-T, half/full duplex with
Protocols .................................. ARP, DHCP, ICMP (ping), TCP/IP,
Default settings .......................... Link speed and duplex
FLEX I/O CONTROL INTERFACE
Number/type ............................ 4 analog or digital (configurable)
Connectors ................................ (1) 3.5 mm captive screw
Digital inputs
Input voltage range .............. 0-24VDC, clamped at +30VDC
Input impedance .................. 28 kohms
Programmable pullup ............ 2 kohms to +5VDC
Threshold low to high............ Programmable range: 100 mV to
Threshold high to low............ Programmable range: 100 mV to
Digital outputs .......................... 250 mA sink from 24VDC max.
configurable serial
5-pole captive screw connector
connector
Default settings (adjustable): 9600,
8-bit, 1 stop bit, no parity
8 = CTS
7 = TX+, 8 = RX+
5 = GND, 7&8 = data+ and tie 7&8
COM2: pin 4 = TX, 5 = RX, 3 = GND
Set
™
– SIS
™
®
Internet Explorer ver. 6
or higher or Netscape
®
Navigator
ver. 7 or higher
autodetect
Telnet, HTTP, SMTP
level = autodetected
IP address = 192.168.254.254,
subnet mask = 255.255.0.0,
default gateway = 0.0.0.0
DHCP = off
connector, 5-pole captive screw
connector
24VDC, default = 2VDC
24VDC, default = 1VDC
Analog inputs ............................ 12 bit A/D, 0 to 24VDC
Pin configurations ...................... 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4;
IR/SERIAL (IR/S) CONTROL INTERFACE — IPL T SFI244 ONLY
Output number.......................... 4
Connectors ................................ (1) 3.5 mm 8-pole captive screw
IR output carrier frequency ........ 30 kHz to 1 MHz
Pin configurations ...................... pins 1, 3, 5, 7 = S1, S2, S3, S4
GENERAL
Power ........................................ 100VAC to 240VAC, 50/60 Hz,
Temperature/humidity................ Storage -40° to +158°F
Rack mount ................................ Yes, with optional 1U rack shelf,
Enclosure type ............................ Metal
Enclosure dimensions ................ 1.7" H x 4.3" W x 3.0" D (1U high,
Product weight .......................... 0.7 lbs (0.3 kg)
Shipping weight ........................ 2 lbs (1 kg)
Vibration .................................... ISTA/NSTA 1A in carton
Listings ...................................... UL, CUL
Compliances .............................. CE, FCC Class A, VCCI, AS/NZS,
MTBF.......................................... 30,000 hours
Warranty .................................... 3 years parts and labor
Model
IPL T SF24 .................................. 60-544-02
IPL T SFI244 .............................. 60-544-06
Optional Accessories
1U 19" VersaTools rack shelf kit .. 60-190-20
1U 19" rack shelf kit .................. 60-190-01
Under desk mount...................... 70-212-01
Projector mount kit .................... 70-217-01
Specifications are subject to change without notice.
5 = GND
connector
pins 2, 4, 6, 8 = GND
10 watts, external, autoswitchable;
to 12VDC, 1 A power supply.
Product requires 0.5 A.
(-40° to +70°C) / 10% to 90%,
non-condensing Operating +32° to
+122°F (0° to +50°C) / 10% to
90%, non-condensing
part #60-190-01, or the
VersaTools
rack shelf,
®
part #60-190-20; also under-
furniture mountable with optional
brackets #70-212-01or projector
mountable with optional brackets
#70-217-01
quarter rack width) 4.3 cm H x
10.9 cm W x 7.6 cm D (Depth
excludes connectors.)
(International Safe Transit
Association)
ICES
Part Numbers
Advertisement
