Options Available In The Shooting Menu - Nikon CoolPix P7700 Reference Manual

Hide thumbs Also See for CoolPix P7700:
Table of Contents

Advertisement

Features That Can Be Set Using the d (Menu) Button (Shooting Mode)

Options Available in the Shooting Menu

Option
Custom Picture
Control
(COOLPIX Custom
Picture Control)
Metering
Continuous
AF area mode
Autofocus mode
Flash exp. comp.
Noise reduction
filter
Allow you to store the customized settings based in
COOLPIX Picture Control, which can set picture editing
options for recording images according to the shooting
scene or your preferences.
Select the method that the camera uses to measure the
brightness of the subject. The camera adjusts the
exposure, which is a combination of shutter speed and
aperture value, based on the brightness measurement. The
default setting is Matrix.
Set the mode used for taking a series of pictures.
• The default setting is Single (i.e. only one picture is
captured at a time).
• When Continuous H, Continuous M, Continuous L,
or BSS (A39) is set, the pictures are shot continuously
while the shutter-release button is fully held down.
• If Continuous H: 120 fps, Continuous H: 60 fps, or
Multi-shot 16 is set, the specified number of pictures
are shot continuously when the shutter-release button is
fully held down.
• If the Intvl timer shooting is set, the pictures are shot
continuously at the set interval of 30 s, 1 min, 5 min, or
10 min when the shutter-release button is fully held
down once.
Set how the camera determines the focus area using the
autofocus to Face priority (A85), Auto, Manual,
Center (normal), Center (wide), Subject tracking or
Target finding AF (A84).
• The AF area mode can also be selected by pressing the
multi selector K (G).
When Single AF (default setting) is selected, the camera
focuses only while the shutter-release button is pressed
halfway. When Full-time AF is selected, the camera
focuses even when the shutter-release button is not
pressed halfway. You may hear the sound of the camera
focusing.
Adjust the flash output. Use this option when the flash is
too bright or too dark. The default setting is 0.0.
Set the strength of the noise reduction function that is
normally performed when recording the picture. The
default setting is Normal.
Description
A
E42
E43
E44
E47
E51
E51
E52
71

Advertisement

Table of Contents
loading

Table of Contents