Using The Self-Timer - Nikon CoolPix P7700 Reference Manual

Using the Self-timer

The self-timer is suitable for taking group shots including yourself and reducing the
vibration when the shutter-release button is pressed.
When using the self-timer, use of a tripod is recommended. Set Vibration reduction
in the setup menu (A110) to Off when using a tripod to stabilize the camera.
1
J n
Press ( self-timer) on the multi selector.
2
Use the multi selector to select n10s (or
n2s, n1s) and press the k button.
• To change the time for self-timer, press K before
pressing the k button.
• n10s (10 seconds): suitable for group pictures.
• n2s (2 seconds), n1s (1 second): suitable for
preventing camera shake.
• When the shooting mode is set to Pet portrait in scene mode, Y (pet portrait auto
release) is displayed (A42). The self-timer is not available.
• The mode selected for the self-timer is displayed.
• If the k button is not pressed within a few seconds, the selection will be canceled.
3
Frame the picture and press the shutter-release button halfway.
• Set the focus and exposure.
4
Press the shutter-release button all the
way.
• The self-timer starts, and the number of seconds
remaining before the shutter is released is
displayed. The self-timer lamp flashes while the
timer is counting down. About one second
before the shutter is released, the lamp stops
flashing and remains lit (except n1s).
• When the shutter is released, the self-timer
turns OFF.
• To stop the timer before a picture is taken,
press the shutter-release button again.
C
More Information
See "Self-timer: after release" (A110) for more information.
Features That Can Be Set Using the Multi Selector
Self-timer
9 9
1/250 1/250 1/250 F5.6 F5.6 F5.6
59