Table of Contents
Advertisement
2
Set the NRW (RAW) processing parameters.
• Apply the settings below while checking the image
and rotating the zoom control toward g (i). Rotate
toward g (i) again to return to the setting screen.
- White balance: Adjust the white balance setting
(E33).
- Exp. +/-: Adjust the brightness.
- Picture Control: Change the settings for finish of the image (E38).
- Image quality: Set the image quality to Fine or Normal (A75).
- Image size: Choose an image size (A77). The image is cropped if I 3984×2656,
u 3968×2232 or H 3000×3000 is selected.
- Distortion control: Set the distortion control (E53).
- D-Lighting: Enhance brightness and contrast in dark portions of pictures (E12).
• Press the l button to change back to the default settings.
• Choose EXE when all settings have been adjusted.
3
Choose Yes and press the k button.
• An NRW (RAW) processed JPEG image is created.
B
Notes on NRW (RAW) Processing
• The COOLPIX P7700 can only create JPEG-format copies of NRW (RAW) images taken with the
COOLPIX P7700.
• NRW (RAW) processing > White balance > Preset manual cannot be selected for photographs
taken at a White balance setting other than Preset manual.
• The Noise reduction filter (E52) that was set for shooting a picture is applied to the JPEG
images to be created.
C
More Information
See "Printing Images of Size 1:1" (A78) for more information.
Editing Still Images
NRW (RAW) processing
EXE
Reset
Check
Create a JPEG copy at these
settings?
Yes
No
E17
Advertisement
Table of Contents
