Nikon CoolPix P7700 Reference Manual page 253

Hide thumbs Also See for CoolPix P7700:
Table of Contents

Advertisement

Image size (pixels)
ISO sensitivity
(Standard output
sensitivity)
Exposure
Metering mode
Exposure control
Shutter
Speed
Aperture
Range
Self-timer
Built-in flash
Range (approx.)
(ISO sensitivity: Auto)
Flash control
Flash exposure
compensation
Accessory shoe
Nikon Creative Lighting
System
• 12 M
4000×3000
• 4 M
2272×1704
• VGA
640×480
• 16:9 9M 3968×2232
• ISO 80 - 1600
• ISO 3200, Hi 1 (equivalent to 6400) (available when using A,
B, C or D mode)
Matrix (224-segment matrix), center-weighted, or spot. Also
when AF area mode is set to Manual, the AF area can be
coupled to the metering range using Focus-coupled
metering.
Programmed auto exposure with flexible program, shutter
priority auto, aperture-priority auto, manual, exposure
bracketing (Tv, Av, Sv) enabled, exposure compensation (in
steps of 1/3 EV in the range of +/-3.0 EV for still pictures and +/
-2.0 EV for movies) enabled
Mechanical and CMOS electronic shutter
• 1/4000 * - 1 s
• 1/4000 * - 60 s (when ISO sensitivity is set to 80 - 400 in D
mode)
* When the aperture value is set to f/4.5 - f/8 (wide-angle position)
or the value is set to f/7.1 - f/8 (telephoto zoom position)
Electronically-controlled 7-blade iris diaphragm
13 steps of 1/3 EV (W) (C, D mode)
Durations of 1, 2 or 10 seconds can be selected
[W]: 0.5 - 10 m (1 ft 8 in. - 32 ft)
[T]: 0.5 - 5.5 m (1 ft 8 in. - 18 ft)
TTL auto flash with monitor pre-flashes and manual flash
enabled
In steps of 1/3 EV in the range between -2 and +2 EV
ISO 518 hot-shoe with sync and data contacts and safety lock
• i-TTL flash control support in combination with Nikon
Creative Lighting System-compatible Speedlights (only
Standard i-TTL flash control is supported during spot
metering mode).
• Flash Color Information Communication is supported.
• Advanced Wireless Lighting is supported by setting SB-910,
SB-900, SB-800 or SB-700 to master flash or by setting SU-
800 to the Commander mode (the remote flash setting is
only applicable to Group A).
• Advanced Wireless Lighting is supported by setting the
built-in flash to the Commander mode (only applicable to
Group A and fixed at 3 CH).
Specifications
• 8 M
3264×2448
• 2 M
1600×1200
• 3:2
3984×2656
• 1:1
3000×3000
F15

Advertisement

Table of Contents
loading

Table of Contents