Adjusting RGB Tone Depths and Tone Thresholds
You can configure the settings for the depth of the 3 primary colors (R: red, G: green and B: blue) and for the
threshold for each tone when the image is converted to blue 4-tones.
Check [Dithering].
Check Dithering [OFF].
Note:
You cannot set [Details] when
Dithering is [ON].
Click [Details].
The Color Detail screen will be displayed.
For 4-tone: Adjust the brightness while
viewing the preview screen.
Adjust the depth for each of the 3 primary
colors (R: red, G: green and B: blue).
Darker
--------------------
Set the threshold for each tone when the
image is converted to 4 tones.
Click [OK].
The changes will be saved.
Clicking on [Cancel] will cancel each setting and
close the window.
Clicking on [Clear] will reset everything to the
default settings. (The window will not be closed.)
Note:
The settings for the RGB tone depths and tone
thresholds are only put into effect after the [OK]
button is clicked.
preview screen
Brighter
43