Creating Still Images - Panasonic IMAGE STUDIO Ver.3.0.0 Operation Manual

Creating Still Images

Target files: BMP, JPG, JPEG, PNG and GIF
Note:
 You cannot create a still image from a moving image
file (file extension: avi).
 Still images cannot be set as openings or closings.
1
Click [New] from the [File] pull-down menu.
2
Click [Create still image].
3
Select the file to be edited and click [Open].
 The selected file will be opened.
 Check that the file type is BMP, JPG, JPEG,
PNG or GIF.
4
Drag the frame to adjust the position and size.
 Regardless of the frame size, the image will be
converted into the default size of each model. (page 16)
(When the vertical-to-horizontal ratio differs, the image
will be reshaped to be displayed as the default of each
model.)
 If the frame is dragged while the shift key is held down,
it can be zoomed in (enlarged) or out (reduced) at the
default ratio of each model.
5
Process the image with dithering or effects. (pages 41 to 45)
Caution:
 You cannot add dithering or effects to files in pfs format
that has been previously saved.
38
(continued on the page 40)