Table of Contents
Advertisement
5-4
To insert a frame from another graphic pattern file:
Click [Open].
Select the graphic pattern file
and click [Open].
The selected file will be opened.
Select the frame to be inserted.
Click [Copy].
Select the insert destination frame.
Click [Paste].
The copied frame will be inserted.
Note:
You cannot add frames, when the number of total
frames exceeds the designated number. (page 7)
Adjust the number of frames so that the opening is
30 (60 for 2004 models) frames and the closing is 20
(40 for 2004 models) frames.
Excess and deficiency in the number of frames cause
failure in saving.
Short-cut keys are available in this operation.
36
Advertisement
Table of Contents
