Software Operation; Selecting A Folder To Save Images - Panasonic BB-HNP11A Operating Instructions Manual

2

Software Operation

2.1 Selecting a Folder to Save Images

This software records camera images to the hard disk on your PC. The folder can
be changed. After the camera is registered, destination folders are automatically
created in the selected folder. The recorded images are saved in the destination
folders.
• If the destination folder is not selected, the recorded images are saved into the
destination folders at the destination folder where Network Camera Recorder
is installed.
• You can change the destination folder to another folder or external hard disk
drives.
Notes
• The folder must have more than 100 MB free capacity.
• The level of the folder-hierarchy depth must be within 6 to prevent the system
from getting unstable.
• The recorded images in the destination folder are displayed on the screen. If
you change the destination folder, the recorded images in the former folder are
not displayed.
• File sizes of recorded images listed below can be used as a baseline. (1 frame
size)
Resolution
640 x 480
320 x 240
160 x 120
• Recorded capacity can be calculated by
Size (KB) x Frame Rate (frames per second) x time (second).
E.g.
640 x 480 resolution, Favor Clarity and 12 frames per second for an hour
settings
50 (KB) x 12 (fps) x 3,600 (s) = 2,160,000 (About 2.06 GB)
If the audio is attached, add 4 KB per second.
2,160,000 (KB) + 4 (KB) x 3,600 (s) = 2,174,400 (About 2.08 GB)
Favor
Items
Clarity
About
File Size
50 KB
About
File Size
25 KB
About
File Size
7 KB
Favor
Standard
Motion
About About
33 KB 20 KB
About About
16 KB 8 KB
About About
5 KB 3 KB
Operating Instructions
23