Stitch Width Latch - Pfaff hobbylock 4752 Instruction Manual

setting
marks
setting
knob
stan-
dard
seams
Set the bed slide for the stitch width latch to
position S. The stitch width latch will be
pushed forward. This setting allows you to
sew all types of standard overlock seams.
stitch width
latch
stitch
width
latch
bed slide
Setting the stitch width latch
(for standard overlock seams or rolled
hems)
Switch the main switch to OFF.
– Open the looper cover and the swivel
plate.
– Disengage the upper blade (see Page 24).
– Press the stitch width setting knob
towards the right and push the bed slide
of the stitch width latch to the setting
mark S (standard) or R (rolled hem). Then
release the setting knob again slowly.
– Move the upper blade to its upper posi-
tion.
– Close the looper cover and the swivel
plate.
rolled
hems
Set the bed slide for the stitch width latch to
position R. The stitch width latch will be
pushed backward. This setting allows you to
sew all types of rolled hems.
stitch
width
latch
bed slide
25