Advertisement
Increase the bobbin thread tension slightly for cording. Pfaff recommends you fill your
cording so it keeps its shape in the laundry. Filler cord thickness depends on cording
size you want. To sew filled cording, use the two cording plates with cord ducts.
Only very narrow tucks ore made without filler cord.
Machine Setting:
Dial A=0
Lever B=1
Dial C=0
Lever E=0
(Both needles are to be threaded by hand.)
Additional Information on Cording
Ordinary cording in medium-heavy fabric is made with cording foot No. 41319 and
cording plate No. 41842.
For thicker cording use foot No. 41318 with cording plate No. 105996.
Cording foot No. 41 641 and cording plate No. 41842 (with center claw, but without
cord duct) serve to moke narrow air tucks in lightweight material. Pin tucks without
filler cord also are made with cording foot No. 41641, However, for these, cording
plate No. 41844 is used. Cording height and width are determined by the distance
between the two needles, the cord diameter and the height of the ridge on the cording
plate. Thread tensions also influence cording size. For uniform spacing of parallel
tucks, attach on adjustable guide to the cording foot. When space between tucks is
very narrow, place the preceding seam into one of the grooves of the foot and use it
as a guide. This procedure insures uniform and parallel rows of cording.
51
R6945.
[
:;;.
Upper Threading for Two-Needle Work
Advertisement
