Advertisement
©
©
0
©
©
0
Instructions for Buttonholing
I Sew first side over a filler cord. When beginning of seam reaches
slide indicator on buttonhole gauge, it is the right length. Leave
needle in fabric on right side of its throw.
2 Lift foot, turn fabric around clockwise, using needle as a pivot.
Lower foot, take one stitch to the left, pull filler cord taut and lay ii
parallel to completed line of stitching.
3 Press lever F down. Make 4 to 6 bartack stitches, slightly closing
together buttonhole end to reduce length of bar.
4 Release lever F. Trim filler cord at end of first stitch
row. Sew second row and stop about 4 to 6 stitches
from end of first row.
5 Press lever F down. Make second tack, as instructed
above.
6 Push lever F up and make 3 to 4 tying stitches.
7 Trim both the sewing and filler threads. Open the
buttonhole with your seam ripper. Be careful not to
injure the bartacks.
Begin
AL
D
p In
45
Advertisement
