1. Machine Skips Stitches
Ca use:
Needle incorrectly inserted.
Wrong needle,
Needle bent.
Machine threaded improperly.
Needle too fine or too thick for the thread.
Remedy:
Push needle up as far as it will go and be sure that the long groove
faces toward you, and flat side of shank away from you.
The correct needle system is stamped an bed slide. (For ordinary
sewing, use System 130R needles.)
Insert new needle.
Check and correct threading as instructed on pages 16 and 17.
Use correct needle and thread.
2. Needle Thread Breaks
Ca use:
The above mentioned may cause th read breakage.
Thread tension too tight.
Poor, knotty or rotten thread used.
Hook raceway is jammed with thread or needs
oiling.
Burrs or sharp edges on needle plate slot.
Remedy:
See remedies listed under 1. above.
Adjust tensions as instructed.
Use good quality threads only.
Clean and oil hook raceway.
Polish needle plate slat with fine emery cloth.
29