Advertisement
Inserting a Full Bobbin into the Bobbin Case
As shown in illustration 1, hold bobbin in left hand so that the thread end falls from the top down toward you,
and insert bobbin into bobbin case.
Hold the bobbin firmly in the bobbin case and pull the thread into the case slot.
Pull the thread under the tension spring until it emerges from the opening at the end of the spring. Leave about
three inches of thread hanging from the bobbin case.
Hold the case by its open latch so that the bobbin cannot Fall out.
R 5867
R 5869
2
R 5870
3
R 5868
4
Advertisement
