Troubleshooting - Pfaff hobby 1132 Owner's Manual

3:4 Maintenance and trouble-shooting
Trouble-shooting
The needle thread breaks.
The needle thread is not threaded properly.
The needle thread tension is too tight.
The needle is bent or blunt.
The needle is incorrectly inserted.
The needle thread and the bobbin thread are not set under the
presser foot when start sewing.
The threads were not pulled to the rear after sewing.
The bobbin thread breaks
The bobbin thread is not threaded properly in the bobbin holder. Page 1:8
Lint has collected in the bobbin holder.
The bobbin is damaged and does not turn smoothly.
The needle breaks
The needle is incorrectly inserted.
The needle screw is loose.
The threads were not pulled to the rear after sewing.
The needle is incorrectly inserted, bent or blunt.
The machine skips stitches
The needle thread is not threaded properly.
A poor quality needle is used.
The needle thread tension is too tight.
Seam puckering
The needle thread is not threaded properly.
The stitch length is too long for the fabric.
Page 1:9
Page 1:15
Page 1:5
Page 1:5
Page 2:2
Page 2:3
Page 3:2
Change the
bobbin
Page 1:5
Page 1:5
Page 2:3
Page 1:5
Page 1:9
Change the
needle; 1:5
Page 1:15
Page 1:9
Page 1:12