Stitch Selection; Stitch Length Dial - Pfaff hobby 1132 Owner's Manual

1:12 Operate your hobby 1132/1122

Stitch selection

Raise the needle to its highest position.
Turn the stitch selector dial (C) to set the
desired stitch at the setting mark (D).
Note: Do not turn the stitch selector dial
while the needle is in the fabric, otherwise the
needle may bend or break.

Stitch length dial

With the stitch length dial(E) you can
adjust the stitch length to the required
length, between 0 and 4 mm, by turning
the dial to the setting mark (F).
The higher the number, the longer the
stitch
The buttonhole marking shows
the adjustment range when
sewing the buttonhole. The further you
turn the dial to 0, the higher the density of
the stitch.
Only at 1132
To sew stretch stitches (light
background), you must turn the stitch
length dial to the stretch area. The closer
to "-" , the higher density of the stitch.
Stretch stitches
(only at 1132)
D
0 1 2
F
C
3 4
E