Straight Stitch - 1; Sewing In Zippers - 1 - Pfaff expression 2034 Instruction Manual

%.LJJILJ S.1LI%tI I%.'
Straight stitch
—
1
Stitch 1 is the basic straight stitch in center needle position.
The stitch length can be increased up to 6 mm. Change
the needle position of the straight stitch to sew in a zipper
or topstitch along the edge of a collar. The 2044 and 2034
have 13 needle positions that can be adjusted with the -1+
button "A".
Tip: Use the "needle up/down" button to easily pivot at collar
points.
Sewing in zippers
—
1
There are different ways to sew in zippers. Follow the
directions included with your pattern for best results.
For all types of zippers it is important to sew close to the
teeth of the zipper. The zipper foot can be snapped to the
presser foot ankle on the left or right, depending on how you
will insert your zipper. Then set the needle position so that
it enters close to the edge of the zipper teeth by using one
of the 13 needle positions available. If the presser foot is
attached on the right side, the needle must only be moved to
the right, If the foot is attached on the left, the needle must
only be moved to the left.
• •, -•
54