.jcvvii
1LAI IL,LJLII I
Bobbin thread monitor (model 2044)
If the bobbin is nearing its end [2 ¾ yd (2 m)-3 ¾ yd
(3 m)]. or there is no thread on the bobbin, the bobbin
symbol appears in the window.
The symbol disappears after a full bobbin is inserted and
you start to sew again.
Altering stitches
Adjust the length, width, balance, density or needle
position of stitches by touching the appropriate
-1+
buttons to the right of the window. Each change is visible
in the window.
To change:
Use -1+ buttons
Stitch width
Pattern width
Needle position for straight stitches
A
Stitch length
<
Pattern length
B
Stitch density
<III>
Pattern density
Balance
C
37