7/9 Hole Foot; Braiding Foot - Pfaff expression 2034 Instruction Manual

7/9 hole foot
Beautiful decorative effects can easily be achieved with this
presser foot. Up to 9 cords may be stitched over using
decorative stitches and a variety of embroidery threads.
•
Cut your cords to the desired length. Thread the cords
through the holes in the foot from the top to the bottom.
Lead the cords under the presser foot and out the back.
Leave the thread tails extending about 1 1/2 inches to 2
inches (4
-
5 cm) at the back.
•
Attach the 7/9 hole foot
•
Sew over the threads with a stitch and thread of your
choice.
Tip: Pearl thread or embroidery twist is well suited.
Tie the cord tails together to prevent the cords from
slipping out of the foot.
Stitch: optional
Tension: 3
-
—,
—. —
Braiding foot
This special foot is best suited for overstitching heavy/bulky
cords (e.g. loosely twisted wool) or a narrower tape/ribbon.
Thread your cord or ribbon through the wire loop/guide
at the front of the foot. Feed it down through the hole
in the center of the foot and guide under the foot and
to the back.
Attach the braiding foot to the machine.
•
Select a stitch and decorative thread of your choice and
stitch over the cord or ribbon.
Stitch: optional
Tension: 3
0
IC
89