Table of Contents
Advertisement
Top/deco switch lever
Choose a stitch program and move the top/
deco switch lever A to the correct position:
Right for top cover, programs 21, 22 and 23
Left for deco cover, programs 24 – 30
For our example, we have chosen program
27.
A
Stitch program selection
Switch the machine on and use the
program selection buttons +/- (11) to select
one of the deco cover programs.
With deco cover stitches, you can choose
from two programs for each stitch. The
decorative thread guides will be set at
their initial positions, and the sewing
speed will be slowed automatically. In our
example we selected 3-needle, 6-thread
deco cover stitch program 27. The machine
gives a warningsignal if the top/deco
switch lever A is in the wrong position.
When you fi rst select the program, the
4874 is set for use with thicker thread
in the decorative thread guides. This is
indicated by the <> symbol.
If you press program selection key + again,
the same program is displayed, but the
machine is now set for use with thinner
thread for decorative thread guides. This is
indicated by the >< symbol.
3.0 1.0
The stitch length and the differential feed
are set automatically, but can be altered
and stored individually (see page 3-4).
Deco Cover
Note: If the top/deco switch
lever is not in the correct
position, the machine will not
run in programs 21 – 30 and an
alarm will sound.
Note: Always set up your
creative 4874 as shown in
the display. Then open the
program memory (see page
3-5) before threading the
machine.
6-3
Hide quick links:
Advertisement
Table of Contents
