Global Usage - Kodak EKTAPRO Quick Reference Manual

EKTAPRO Slide Projectors can be used around the world if you pay attention to
the following:
1
. Get informed about the local mains plug at your destination. Different wall plugs need
a different mains cable or an adaptor!
2.
Get informed about the local mains voltage. You need to set the voltage selector to the
local mains voltage at your destination. An incorrectly adjusted mains voltage can
damage the projector! For correct voltage setting, see the instruction manual.
3
. Different fuse: countries with 100 or 120 V mains need a 4 A slow blow/250 V fuse;
countries with 220, 230 or 240 V mains need a T 2A L/250 V fuse. For fuse exchange,
see the instruction manual.
Use of slide shows:
Please note the following when travelling international with
Ektapro projectors and multivision slide shows:
Due to different voltage frequencies (50 Hz or 60 Hz), some fast
programmed slide sequences may be projected a little bit faster or
slower!
Quick Reference -- The ultimate reference for Kodak

Global Usage

Voltage
indication
EKTAPRO Slide Projectors
7