Refrigerator Features; Utility Compartment; Door Bins; Spillclean* Glass Refrigerator Shelves - KitchenAid KSSC36FMS Use & Care Manual

Refrigerator features
Utility compartment
The utility compartment can be placed in any position on
the refrigerator door.
To remove:
1, Grasp both ends of compartment.
2. Lift compartment up and pull out.
To replace:
1. Insert compartment hooks into ladder slots on both
sides of refrigerator door.
2. Push compartment down to lock into place.
Door bins
Door bins hold two-liter bottles and can be placed in any
position on the refrigerator door.
To remove:
1. Grasp door bin.
2, Lift door bin up and pull out.
To replace:
1, Insert door bin hooks into ladder slots on both sides of
refrigerator door.
2, Push door bin down to lock into place.
SpillClean*
glass refrigerator shelves
Adjust the shelves to match the way you use your
refrigerator.
To remove:
1, Tilt shelf up at front and lift shelf up at back.
2. Pull shelf straight out.
IMPORTANT: Glass shelves are heavy. Handle them
carefully.
To replace:
1, Guide the rear shelf hooks into slots in the shelf
supports on the back of the refrigerator wall.
2. Tilt shelf up at front until hooks drop into slots. Lower
front of shelf to level position.
3, Check the stability of the shelf to be sure hooks have
been inserted properly.