Model - GE JGBP36 Owner's Manual & Installation Instructions

Installation Instructions
[_ ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Appliance Power Cord will
be Disconnected Frequentlg.
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the two-
prong wall receptacle replaced with a three-prong
(grounding) receptacle bg a qualified electrician before
using the appliance.
The installation of appliances designed for mobile home
installation must conform with the Manufactured Home
Construction and Safety Standard, Title 24 CFR,Part
]280 (formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or,
when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-Ups),
ANSI A225.!, latest edition, or with local codes. In
Canada, mobile home installation must be in
accordance with the current CAN/CSA Z240/HH
Mobile Home Installation Code.
Electric Disconnect
Locate disconnect plug on the range back.
m Pinch sides of connector and pull out of range back.
[] SEAL THE OPENINGS
Seal ang openings in the wall behind the range and in the
floor under the range when hookups are completed.
[] ASSEMBLE SURFACE BURNERS
CAUTION: Do not o perate theburner
without all burner parts in place.
r_ Place burner heads over the electrodes on the cooktop,
and then replace the burner caps onto the burner heads
in the correct locations according to their size.
42
r_ ASSEMBLE SURFACE BURNERS (CONT.)
r_ There is one oval (center) head and cap assemblg
(on some models) and four side heads and caps.
On modelssoequipped:
Medium burner Ovalheadandcap assembly Smallburner
head_and cap • _ • heado a ni cap
Frontof range
er
headandcap
Extralarge
burnerhead
and cap
On modelssoequipped:
Medium burner
headandcap
Small burner
headand cap
&
• ®
0 • •
dlil}L_u Frontof range b_ u
Me rner Large rner
headandcap headandcap
B3
Make sure theslotintheburner h ead is positioned over theelectrode.
Elec_roae
Make sure that the heads and caps are replaced
in the correct locations.
Grates
Placethe left, right and center grates on the cooktop.
These grates are position specific.The undersides of
the left and right grates are marked "LEFTFRONT" and
"RIGHTFRONT." P lacethe middle grate with its bowed
front toward the front of the range.
Left Front Center RightFront
NOTE:Some models onlg have side grates.