Frigidaire DGGF3054KFN Use & Care Manual page 65

Check surface burner cap placement
before operating surface burners
It is very important to be sure that all surface burner caps
and burner grates are properly installed and in the correct
locations BEFORE operating the cooktop burners.
Burner m
cap
,_ I
Burner cap lip
To prevent flare-ups and avoid creation of harmful
by-products, do not use the cooktop without all burner
caps properly installed to insure proper ignition and gas
............ f!ame size:
Fig. 1
II
• To avoid possible burns DO NOT attempt any of the
cooktop or surface burner cleaning instructions
provided before turning OFF all of the surface
burners and allow them time to cool.
• Any additions, changes or conversions required in
order for this appliance to satisfactorily meet the
application needs must be made by an authorized
qualified Agency.
For round style burners, the burner cap lip (See Fig. 1)
should fit snug into the center of burner head and rest
level. Refer to Figs. 2 & 3 for correct and incorrect burner
cap placement. Once in place, you may check the fit by
gently sliding the burner cap from side to side (Fig. 4) to
be sure it is centered and firmly seated. When the burner
cap lip makes contact inside the center of the burner head
you will be able to hear the burner cap click. Please note
that the burner cap should NOT move off the center of the
burner head when sliding from side to side.
Check and be sure that the oval style (some models)
burner cap is correctly positioned. It should rest level on
top of oval burner head.
• Always keep all surface burner caps in place
whenever operating any surface burner.
• When placing the burner caps, be sure that all
burner caps are seated firmly and rest level on top
burner heads.
Correct burner cap
placement
Fig. 2
Incorrect burner cap
placement
Fig. 3
Fig. 4
Cleaning the cooktop and surface burners
Cleaning recessed and contoured areas of cooktop
It is important to routinely clean the cooktop. Keeping the
cooktop surface clean after each use will help avoid soil
buildup from becoming very difficult to remove.
To avoid scratching, wipe with a clean, damp cloth and wipe
dry. If a spill occurs on or in the recessed or contoured
areas of the cooktop, blot up spill with an absorbent cloth.
Rinse with a clean, damp cloth and wipe dry.