Electronic Control Settings; Userpreferencesmenu; Adjustingoventemperature - Electrolux EI30EW45JS1 Use & Care Manual

Electronic Control Settin
[] [] [] [] II [] [] [] II [] [] [] [] II II II II [] [] [] [] II
The user preferences menu includes all user defined options. This feature enables you to
control the various options of the electronic controls. This menu features the Time of Day,
Celsius or Fahrenheit display mode, Continuous Bake or 12 Hour Energy Saving modes, Clock
display or No-Clock display, 12 Hours Time of Day or 24 Hours Time of Day, Audio Control
and Adjusting the oven temperature. The User Preferences menu is only available when the
oven is not being used (not cooking).
To browse through the User Preferences menu
1. Press USER PREF _to bring up the User Preferences menu.
2. Press USER PREF _-_ again to browse through the menu pages.
+
3. Press ,_or _oto toggle between the available options.
4. Press START <_ while the chosen option is on display to change.
5. Press CANCEL @ when finished to get back to the standard oven display.
User Preferencesmenu items:
• CLO 12:00; Setting the clock.
• CLO on; Clock on/off.
• CLO 12hr; 12/24 hour time of day display,
• F-C F; Fahrenheit / Celcius display,
• E S on; 12 hour Energy Saving on/off.
• AUd; Audio on/off and volume.
• UPO; Adjusting oven temperature.
• rSt ; Reset to default factory settings,
The clock may be set for 12 or 24 hour time of day operation (see advanced settings section).
The clock has been preset at the factory for the 12 hour operation. When the range is first
plugged in, or when the power supply to the range has been interrupted, the display will show
"CLO 12:00". The clock must be set before the oven can be used.
When power to the unit has been interrupted, to set the Clock, skip step 1 in the example
below and follow steps 2 and 3.
To set the clock (examplefor 1:30)
1. Press USER PREF ,_:_,3 until you get to the CLO 12:00 menu page.
+
2. Press :[ 3' O,padstosetthetimeofdaytol:30. The pads ,_or _o can also be pressed
to raise or lower the actual time displayed.
3. Press START _ to accept the changes and go back to user preferences menu display.
4. Press CANCEL (,_ when finished to get back to the standard oven display.
The oven control can be programmed to display the time of day or not. The oven has been
preset at the factory to display the time of day.
Changing clock disp!ay between ON and OFF:
1. Press USER PREF _-_) until you get to the ClO on menu page,
+
2. Press _o or ,_ to toggle between displaying or hiding the clock.
3. Press START @ to accept the changes and go back to user preferences menu display.
4. Press CANCEL (_) when finished to get back to the standard oven display.