Night Mode; Adjusting The Audio Delay - Denon AVR-686 Operating Instructions Manual

Basic Operation
STANDARD-
INPUT
SELECTOR-
ENTER-
INPUTMODE-
•_ _]#]({ ) {][i([ )
-CURSOR
Basic Operation
r P!ay a program source (DVD, etc.),
r
Press the
CURSOR
A bu_on to switch t0 the
audi0 delay adjustment display:
Press the
CURSOR < or D
button to set the delay
÷ With a movie source, for example, adjust so that the
m0yement of the actor s' !ips is synchr0nized with the sound:
When listening at night or at lower volumes, the night mode
improves listenabiiity.
Press and hold the NIGHT button for several seconds
t0 enter the night m0de,
• Canceling night mode:
Press and hold the NIGHT button again.
• The night mode only works when playing program sources
recorded in Delby Digital or DTS.
• When watching a DVD or other video source, the picture on the
monitor may seem delayed with respect to the sound, in this
case, adjust the audk) delay to delay the sound and synchronize
it with the picture.
• The audio delay setting is stored separately for each input
source.
• This adjustment carl be performed with the system setup
(_ page 43) or from the remote control unit, as described
below.
Select the input source.
Example: DVD
NPUT SELECTOF DV_ V_)F
O
Main unit 'E_emote control Un[l
Press the INPUT MODE button to set the input
mode to "AUTO".
3
Select Dolby/DTS Surround.
S_AN_A_D ST_NI_t0
Main unit rE{emote control unli
• The audio delay setting does not apply when playing in the EXT.
IN mode or in the analog input direct or stereo mode.
24
I ENGLISH I