Restorer; Night Mode; Audio Delay - Denon AVR-1909 Owner's Manual

ENGLISH

RESTORER

This function restores compressed audio signals to how they
were before compression and corrects the sense of volume of
the bass and treble to obtain richer playback sound.
[Selectable items]
OFF
Do not use RESTORER.
Mode1
(RESTORER 64):
I
Optimized mode for compressed sources with very weak highs.
Mode2 (RESTORER 96):
Apply suitable bass and treble boost for all compressed sources
Mode3
(RESTORER HO)
Optimized mode for compressed sources with normal highs.
The default setting for "iPod" is "Mode3". All others are set to "OFF"
When set to something other than "OFF",
C
----- Mode 1 ----- Mode2
OFF
(RESTORER 64)
Mode 3
(RESTORER HO)
~
Operating from the main unit or main remote
control unit
RESTORER.
Press
About the RESTORER function
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 MC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals .
• This is displayed on the menu and can be set when the input source
selected to "XM ': or analog signals (including AM/FM and SIRIUS
IS
signals) or PCM signals (fs 44.1/48 kHz) are input.
=
51
I
For details on adjusting individual parameters, see "Adjusting the parameters" (ll2!r'page 46).

Night Mode

Optimized setting for late-night listening.
Set the dynamic range compression of the output audio.
[Selectable items]
~:
Turn night mode off.
Low
Low setting.
Mid
Middle setting.
High
High setting.
~
Operating from the main remote control unit
[NIGHH
Press
"1mmiI"
The
selected.
C_
"!lIIimlml"
is displayed.
-N,u8
• When the" Dynamic EO" setting is "ON ': setting is not possible.
(RESTORER 961
• When the "Dynamic Volume" setting is "ON': setting is not
possible.
• When a HD-Audio (DOLBY DIGITAL Plus, DOLBY TrueHD, DTS-HD)
signal is input. the "Night Mode" can not be selected.
indicator lights when "Low", "Mid" or "High" is
O FF H~:; _---M-id-~
_ __ - _ _

Audio Delay

Compensate for mismatched timing between video and audio.
Delay audio.
This sets the delay time for audio signals.
I -
I
[Variable range] 0 ms 200 ms
If you wish to adjust the "Audio Delay" while playing HDMI or
c:,.
component video signals, press to set "OSD" to "OFF". This way
the audio delay can be adjusted while watching the picture. (Press
again to switch to the on-screen display.)
~
Operating from the main remote control unit
[AUDIO DELAY].
Press
-N·U8
• When operating by remote control, the onscreen display is not
shown.
• This cannot be adjusted when playing in the EXT. IN, DIRECT or
STEREO mode (with "Front Speaker" set to "Large", "Tone
Control" to "OFF" and "MultEO", "RESTORER" and "Night Mode"
to "OFF".)
• When the auto lip sync correction function is operating, you can set
within the range 0- 100 ms.
• Store" Audio Delay" for each input source.
1::.