Advertisement
Available languages
Available languages
WARNING
Fire and/or Electrical
Shock Hazard
Do not operate with a clogged
exhaust filter or without the exhaust
filter or exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge
must be
replaced when dirty. Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT
be washed as it will
lose its dust trapping
ability.
Replacement
exhaust filters are available
through Sears Service Center under part
no. 86880. See "Requesting
Assistance
or Service"
1. Pull out and up
on the
cover to remove
from the motor
cover and lay aside.
3. Place the new
filter into the motor
cover with the
grey edge down.
Tab
"_
slot
2. When the
exhaust filter
becomes
dirty,
remove it by
pulling straight up.
Exhaust
Filter
4. Reinstall the
exhaust filter
cover by insert-
ing the tab into
the slot in the
motor cover.
Press firmly to
snap exhaust fil-
ter cover into
place.
Always follow all safety precautions when
cleaning and servicing the Power-Mate® .
Electrical
Shock Or Personal Injury
Hazard
Disconnect
electrical supply before
servicing
or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly
starting.
14
Advertisement
