Kenmore 116.22512 Owner's Manual page 17

TO REPLACE BRUSH DOWEL
E
• _ WARNING .........................
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting,
TO CHECK BRUSHES
__.__=__IF When brushes
are worn to the
level of the base
support bars,
replace the
brush dowel.
Base Support Bars
1. Remove Power-Mate ®cover, belt and
brush assembly, See "To Remove Belt" in
BELT CHANGING AND BRUSH
CLEANING..
2. Remove brush supports, washers,
screws, end brush, brush sprocket pieces
from ends of brush assembly_
3. Reassemble brush assembly. To line up
screw holes in dowel, sprocket and end
brush, be sure the brush portion of end
brush lines up with brushes on brush
dowel
4. Replace belt, brush assembly, Power-
Mate®cover, light bulb and light cover. See
"To replace belt" in BELT CHANGING AND
BRUSH CLEANING.
_Washer
End
Cap
Agitator Unit
Brush
Sprocket End
Flange Brush End
Screw Cap
Screw i
Washer
Brush Sprocket
17