Simple Counting - Excell Weighing Scale User Manual

EXCELL PRECISION CO., LTD

6. Simple Counting

6-1 Counting mode access
UNITS
Press the
counting mode.
6-2 Sampling
This important procedure is to let the scale calculate the unit weight:
(1) Press the
(2) Put enough samples onto the platter according to the selected number, and then
press the
becomes stable, the display shows the number of samples on the platter.
(3) Remove the samples from the platter, and the scale is ready to count.
6-3 Counting
Place the objects to be counted onto the platter, and the quantity shows on the display.
4 When any of the following indicator is on, the scale can still count, but inaccuracy may
occur:
Sample too small (
Unit weight too small (
4 The scale will memorize the last sample size when switched off, and the same can be
used when the scale enters the counting mode next time.
If the number of samples changes by 5 pieces from the last sample used, the scale will
4
calculate the new unit weight automatically.
Dolphin 9903 V 1.1
key to select the "Pcs" unit, and the scale enters the simple
NET
GROSS
key to select a sample size 10, 20, 50, 100 or 200.
UNITS
key. The display shows "- - - - - -" first. When the scale
): total sample weight is less than 20 divisions
): unit weight is less than 1/5 division.
.
9
SME300000041