Playback Using The Remote Control; Installing The Battery; Beam Effective Area; Buttons And Functions - JVC GZ-MG30U Instructions Manual

VIDEO RECORDING& PLAYBACK EN
27
I Playback Usingthe RemoteControl
The full-function remote control unit can operate
this camera from a distance as well as the basic
operations (playback, stop, pause, fast-forward
and rewind) of your VCR.
Installing
the Battery
The remote control uses
one lithium battery
(0R2025).
1 Pull out the battery
holder by pushing the lock
tab.
2 Insert the battery in the
holder, and be sure to have the "+" mark visible.
3 Slide the holder back in until you hear a click.
Beam Effective A rea
When using the remote
control, be sure to point it at
the remote sensor. The
transmitted beam's
approximate effective
distance for indoor use is 5 m
(16 ft).
Use the remote control in
front of the camera facing
toward the lens.
Remote sensor
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons andFunctions
O Infrared Beam Transmitting Window
• Transmits the beam signal.
@ ZOOM (T/W) Buttons
Zoom In/Out (:pg. 23)
O Up Button
Rotate Button (clockwise) ( pg. 30)
• Skip Backward Button
O Left Button
• Back Button
OPLAYLISTButton( -pg. 42)
• START/STOP Button
O SNAPSHOT Button (: pg. 28)
@ INFO Button ( pg. 38)
• Skip Forward Button
O PLAY/PAUSE Button
@ Right Button
@ Next Button
• Down Button
Rotate Button (counterclockwise) ( pg. 30)
• INDEX Button
• DATE Button