Page 1
INSTRUCTIONS MANUEL D’UTILISATION HARD DISK CAMCORDER CAMÉSCOPE À DISQUE DUR GZ-MG467 GZ-MG360 GZ-MG335 GZ-MG330 Dear Customer Thank you for purchasing this hard disk camera. Before use, please read the safety information and precautions contained in pages 2 and 3 to ensure safe use of this product.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Page 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Easy Start Guide Preparation Attach the battery pack Charge the Battery Pack. pg. 14) Video recording Select (video) mode Playing back Select (video) mode Open the lens cover BATT. Open the LCD monitor The camera turns on automatically. Select recording (REC) mode [ 5 h 5 6 m ] SELECT PLAY/REC...
Page 5
CAUTION: Touch the sensors with your fi nger. The sensors do not function if you touch them with your fi nger nail or with gloves on. When [SET DATE/TIME!] appears, select [YES] within 10 seconds. SET DATE/TIME! pg. 6) Press the START/STOP button to start recording Select the desired fi...
Page 6
How to Select an Item Using the Touch Sensor An example screen in English is used for the guidance below. Selecting an item from the menu list (on the menu screen) MENU IMAGE QUALITY IMAGE SIZE GAIN UP BASIC SETTINGS Q Slide your fi...
Page 7
Make a backup of important recorded data JVC will not be responsible for any lost data. It is recommended to copy your important recorded data to a DVD or other recording media for storage. ( Make a trial recording Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly.
Adobe’s web site: http://www.adobe.com/ NOTE Select your desired language with a single click. The model name is indicated on the bottom of your camcorder. PC OPERATION File Backup on a Windows System Requirements ... 23 Software Installation ... 24 Connecting the Camera to the PC ...
For the connection using the S-Video jack and DV jack, an optional S-Video cable and DV cable are needed. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core fi lter to the camera. The core fi lter reduces interference.
Index NOTES • The LCD monitor can rotate 270°. • Power-linked operation You can also turn the camera on/off by opening/closing the LCD monitor during the recording mode. • Be careful not to cover 4, 5, 7 and 9 during shooting.
Page 11
Camera ! Touch Sensor ( pg. 6) # OK (DISP) Button [OK/DISP] ( $ Menu Button [MENU] % Power Switch [POWER] (You can turn off the camera by pressing and holding this button.) & Speaker ( Playback/Recording Mode Switching Button [SELECT PLAY/REC] ( ) Access/Charge Lamp [ACCESS/CHARGE] (Blinks when you access fi...
Indications on LCD Monitor During both Video and Still Image Recording 1/250 JA N . 2 0 . 2 0 0 7 4:55PM ! Selected Operation Mode Indicator : Auto Mode : Manual Mode # Effect Mode Indicator $ Tele Macro Mode Indicator % LED Light Indicator &...
Page 13
During Video Playback JA N . 2 0 . 2 0 0 7 4:55PM ! Mode Indicator ( pg. 18) # Effect Mode Indicator $ Wipe/Fader Effect Indicator : Playlist Playback Indicator (Appears when playing back a playlist.) ¨ª : Event Search Playback Indicator (Appears when playing back a video fi...
Necessary Settings before Use Charging the Battery Pack Close the LCD monitor to turn off the camera. Attach the battery pack. Slide the battery pack down until it locks in place. Bottom of the Camera Connect the AC adapter. DC Jack AC Adapter •...
NOTES • If “COMMUNICATING ERROR” appears, there may be a problem with your battery. In such a case, consult your nearest JVC dealer. • The recordable time display should only be used as a guide. It is displayed in 10 minute units.
Recording Files Video Recording Preparation: Open the LCD monitor to turn on the camera. Slide the mode switch to select (video) mode. To stop recording Press the START/STOP button again. To view the video you just recorded Select during pause. During the preview, you can delete the video by selecting To change the picture quality...
Still Image Recording Preparation: Open the LCD monitor to turn on the camera. Slide the mode switch to select (still image) mode. To view the image you just recorded Select after shooting. During the preview, you can delete the image by selecting To change the picture quality Change the settings in [IMAGE QUALITY] from the MENU.
Playing Back Files Video/Still Image Playback Slide the mode switch to select (video) or (still image) mode. Press the SELECT PLAY/REC button to select playback mode. SELECT PLAY/REC The index screen for videos appears. Operations during Video Playback : Return to the fi rst scene of the fi le : Go to the fi...
Watching Images on TV Preparation: • Set [SWITCH TO ANALOG I/O] to [OUTPUT] from the MENU. (Factory-preset = [OUTPUT])* • Turn off all units. * This does not apply to the GZ-MG360/330 model. AV Jack DC Jack AC Adapter NOTES •...
Managing Files CAUTION Do not remove the recording medium or perform any other operation (such as turning off the power) while accessing fi les. Also, be sure to use the provided AC adapter, as the data on the recording medium may be corrupted if the battery becomes exhausted during operation.
Page 21
Select [EXECUTE AND QUIT] (when performing [DELETE]) or [YES] (when performing [PROTECT]). EXECUTE AND QUIT Deleting/Protecting All Files After performing steps 1-2 ( Select [DELETE ALL] or [PROTECT ALL]. When [DELETE ALL?] or [PROTECT ALL?] appears, select [YES]. DELETE ALL? (EXCEPT PROTECTED FILE) To quit the screen Select [QUIT].
Copying Files Types of Copying and Connectable Device The Camera You can copy video/still images from HDD onto microSD card or from microSD card to HDD with this camera alone. DVD Burner (CU-VD3) You can copy video fi les recorded on this camera onto DVD discs.
PC OPERATION File Backup on a Windows Install the software that came with the camera to your PC. You can back up your fi les on your PC with a simple one-touch operation, edit your fi les on your PC, and also create discs. Even if you do not install the software, you can still back up your fi...
File Backup on a Windows Software Installation Please read the “JVC SOFTWARE LICENCE AGREEMENT” in the CD-ROM instruction before you install software. The following software is included in the CD- ROM that came with your camera. • CyberLink DVD Solution...
Select the desired language and click [OK]. Click [Yes]. The software installation starts. Click [Finish]. When installation is completed The installed software is displayed in [All Programs]. The backup destination folder [MyWorks] for fi les is created on the hard disk drive that has the most free space.
File Backup on a Windows When you have fi nished operation Always follow the procedures below when disconnecting the camera, or turning off the power of the camera/PC. Failing to do so may cause damage to the camera and PC. 1) Confi...
Click [EVERIO_HDD] or [EVERIO_ SD]. When the progress bar disappears, the process is complete. File Backup on the PC without Using Software Preparation: Connect the camera to the PC with the USB cable. ( pg. 25) On the PC, create a folder to back up fi...
Other Windows Getting More Use of the Software For more information on operations of the software, see the Tutorials for each software program or the User’s Guides. PowerCinema NE for Everio Double-click the PowerCinema NE for Everio icon. Start PowerCinema NE for Everio. Click [Tutorial].
Folder Structure and Extensions Recording medium [DCIM] [XXXJVCSO] [XXXJVCSO] [XXXJVCSO] [SD_VIDEO] [MGR_INFO] [PRGXXX] [PRGXXX.PGI] [MOVXXX.MOD] [MOVXXX.MOI] [PRGXXX] [PRGXXX] [EXTMOV] [MOV_XXX.MOD] [DEM_XXX.MPG] [MISC] [PRIVATE] * Information such as the date and time of recording, recorded with the video fi le. Extensions Video fi...
File Backup on a Macintosh You can back up camera fi les onto your computer. System Requirements Hardware: Macintosh must be standard equipped with USB 2.0 port Mac OS X (v10.3.9, v10.4.2 to v10.4.10) Connecting the Camera to the Macintosh Preparation: Close the LCD monitor to turn off the camera.
File Backup on the Macintosh Preparation: Connect the camera to the computer with the USB cable. ( pg. 30) On the computer, create a folder to back up fi les into. Open the LCD monitor to turn on the camera. On the camera, select [PLAYBACK ON PC].
Contact us for Information on the Provided Software Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC offi ce or agency in your country (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html) about this software, please have the following information ready.
If the problem is not solved, reset the camera. ( • If the problem persists, please consult your nearest JVC dealer. To reset the camera 1) Close the LCD monitor to turn off the camera and remove the power supply (battery pack or AC adapter) from the camera, then reattach it.
Troubleshooting Trouble The focus is not adjusted automatically. The continuous shooting speed is slow. Playback cannot be performed. During video playback, indicator fl ashes. Files cannot be deleted. The data process is too slow after the power is switched on or the mode is changed.
Warning Indications Indication (Battery indicator) SET DATE/TIME! CHECK LENS COVER HDD ERROR! MEMORY CARD ERROR! VIDEO MANAGEMENT FILE IS BROKEN. TO RECORD/PLAYBACK VIDEO, RECOVERY IS REQUIRED. RECOVER? RECORDING FAILURE POWER IS OFF, OR USB DEVICE IS UNSUPPORTED DROP DETECTION WORKED AND THE POWER IS TURNED OFF Meaning/Action •...
Specifi cations Camera For general Power supply DC 11 V (Using AC adapter) DC 7.2 V (Using battery pack) Power consumption [GZ-MG467] Approx. 3.2 W* [GZ-MG360/335/330] Approx. 2.7 W* * When the LED light is off and the monitor backlight is set to [STANDARD] mode. Dimensions (W x H x D) 113 mm x 68 mm x 54 mm (4-1/2"...
Remote Control Power supply DC 3 V Battery life Approx. 1 year (depending on the frequency of use) Operating distance Within 5 m (16.4 ft) Approximate recording time (minutes) (for video) Recording medium Quality ULTRA FINE FINE NORMAL ECONOMY GZ-MG335/330 * GZ-MG467/360 [GZ-MG467] Approximate number of storable images (for still image) Recording medium...
AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a “Siemens Plug”, as shown. For this AC plug adapter, consult your nearest JVC dealer. Battery Packs The supplied battery pack is a lithium-ion battery. Before...
Page 39
When a child uses the unit, there must be parental guidance. Changes or modifi cations not approved by JVC could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 42
Précautions de sécurité AVERTISSEMENT : POUR ÉVITER LES RISQUES D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER L’APPAREIL À LA PLUIE NI À L’HUMIDITÉ. REMARQUES : • La plaque d’identifi cation et l’avertissement de sécurité se trouvent sous l’appareil et/ou au dos. •...
Page 43
CONSIGNES DE SÉCURITÉ IMPORTANTES 1. Lire ces instructions. 2. Conserver ces instructions. 3. Tenir compte de tous les avertissements. 4. Respecter toutes les instructions. 5. Ne pas utiliser cet appareil à proximité de l’eau. 6. Ne nettoyer qu’avec un chiffon sec. 7.
Page 44
Guide de démarrage Préparation Fixer la batterie. Charger la batterie. p. 14) BATT. Enregistrement vidéo Sélectionner le mode (vidéo) Lecture Sélectionner le mode (vidéo) Ouvrir le couvre- objectif Sélectionner le mode d’enregistrement (REC) Sélectionner le mode de lecture (PLAY) pour affi cher les miniatures sur l’écran Ouvrir l’écran LCD L’appareil photo s’allume...
Page 45
ATTENTION : Touchez les capteurs avec votre doigt. Les capteurs ne fonctionnent pas si vous les touchez avec un ongle ou avec des gants. Lorsque [REGLER DATE/HEURE ! ] apparaît, sélectionner [OUI] pendant 10 secondes. REGLER DATE/HEURE ! p. 6) Appuyer sur la touche START/STOP pour lancer l’enregistrement.
Page 46
Comment sélectionner une option à l’aide du capteur tactile Un écran d’exemple en anglais est utilisé ci- dessous. Sélection d’une option dans la liste de menu (dans l’écran de menu) MENU IMAGE QUALITY IMAGE SIZE GAIN UP BASIC SETTINGS Q Déplacez votre doigt le long du capteur. R Touchez la touche OK.
Page 47
Effectuer une sauvegarde des données enregistrées importantes JVC décline toute responsabilité pour toute perte de données. Il est recommandé de les copier sur un DVD ou un autre support d’enregistrement pour stockage. ( Effectuer un enregistrement test Avant d’enregistrer des données importantes, faites un enregistrement test et lisez les données enregistrées afi...
Page 48
Table des matières PRISE EN MAIN Accessoires ... 9 Comment utiliser la station d’accueil Everio ... 9 Fixer le fi ltre à noyau de ferrite sur le câble USB ... 9 Index ... 10 Indicateurs sur l’écran LCD ... 12 Réglages nécessaires avant l’utilisation ...
Pour la connexion à l’aide des prises S-Vidéo et DV, des câbles S-Vidéo et DV en option sont nécessaires. Contacter le centre d’entretien JVC indiqué sur la fi che incluse dans l’emballage pour en savoir plus sur leurs disponibilités. Veiller à connecter l’extrémité munie du fi ltre à noyau de ferrite à...
Index REMARQUES • L’écran LCD peut pivoter sur 270°. • Opération avec alimentation couplée Vous pouvez également allumer/éteindre l’appareil photo en ouvrant/fermant l’écran LCD en mode d’enregistrement. • Veiller à ne pas obstruer 4, 5, 7 et 9 lors de la prise de vue.
Page 51
Appareil photo ! Capteur tactile ( p. 6) # Touche OK (DISP) [OK/DISP] ( $ Touche de menus [MENU] % Touche marche/arrêt [POWER] (Vous pouvez éteindre l’appareil photo en maintenant enfoncée cette touche.) & Haut-parleur ( Commutateur du mode Lecture/ Enregistrement [SELECT PLAY/REC] p.
Indicateurs sur l’écran LCD Pendant l’enregistrement de vidéos et de photos 1/250 JA N . 2 0 . 2 0 0 7 4:55PM ! Indicateur du mode d’opération sélectionné : Mode auto : Mode manuel # Indicateur du mode d’effet $ Indicateur du mode télé-macro % Indicateur du voyant LED &...
Page 53
Pendant la lecture de vidéos JA N . 2 0 . 2 0 0 7 4:55PM ! Indicateur de mode ( p. 18) # Indicateur du mode d’effet $ Indicateur d’effet de fondu/volet : Indicateur de lecture de liste (apparaît lors de la lecture d’une liste de lecture.) ¨ª...
Réglages nécessaires avant l’utilisation Charge de la batterie Fermer l’écran LCD pour éteindre l’appareil photo. Fixer la batterie. Faire coulisser la batterie vers le bas jusqu’à ce qu’elle se verrouille. Partie inférieure de l’appareil photo Brancher l’adaptateur secteur. Prise DC Adaptateur secteur •...
REMARQUES • Si « ERREUR DE COMMUNICATION » apparaît, un problème de batterie est possible. Dans ce cas, contacter le revendeur JVC le plus proche. • La durée d’enregistrement affi chée ne devait être utilisé qu’à titre indicatif. Elle est affi...
Enregistrement de fi chiers Enregistrement de vidéos Préparation : Ouvrir l’écran LCD pour allumer l’appareil photo. Déplacer le commutateur de mode pour sélectionner le mode (vidéo). Pour arrêter l’enregistrement Appuyer de nouveau sur la touche START/STOP. Pour visualiser la vidéo qui vient d’être enregistrée Sélectionner pendant une pause.
Enregistrement de photos Préparation : Ouvrir l’écran LCD pour allumer l’appareil photo. Déplacer le commutateur de mode pour sélectionner le mode (photo). Pour visualiser la photo qui vient d’être prise Sélectionner après la prise de vue. Sélectionner pour supprimer la photo lors de la visualisation.
Lecture de fi chiers Lecture de vidéos/photos Déplacer le commutateur de mode pour sélectionner le mode (photo). Appuyer sur la touche SELECT PLAY/REC pour sélectionner le mode de lecture. SELECT PLAY/REC L’écran d’index pour les vidéos apparaît. Opérations lors de la lecture de vidéos : Retourner à...
Visualisation de photos sur le téléviseur Préparation : • Régler [COMM. E/S ANALOGIQUE] sur [SORTIE] dans le MENU. (Réglage d’usine = [SORTIE])* • Éteindre tous les appareils. * Ceci n’est pas applicable au modèle GZ-MG360/330. Prise AV Prise DC Adaptateur secteur REMARQUES •...
Gestion des fi chiers PRÉCAUTION Veiller à ne pas retirer le support d’enregistrement ou effectuer d’autres opérations (comme éteindre l’appareil) lors de l’accès aux fi chiers. Veiller également à utiliser l’adaptateur secteur fourni pour éviter d’endommager les données sur le support d’enregistrement si la batterie venait à...
Page 61
Sélectionner [EXECUTER ET QUITTER] (en utilisant [SUPPRIMER]) ou [OUI] (en utilisant [PROTEGER]). SUPPRIMER EXECUTER ET QUITTER Suppression/Protection de tous les fi chiers Après avoir effectué les étapes 1-2 p. 32) Sélectionner [TOUT SUPPRIMER] ou [TOUT PROTEGER]. Lorsque [TOUT SUPPRIMER ?] ou [TOUT PROTEGER ?] apparaît, sélectionner [OUI].
Copie de fi chiers Types de copie et appareils qui peuvent être utilisés L’appareil photo Vous pouvez copier des photos du disque dur sur la carte microSD ou de la carte microSD sur le disque dur en utilisant seulement cet appareil photo. Graveur de DVD (CU-VD3) Vous pouvez copier des...
UTILISATION DE L’ORDINATEUR Sauvegarde de fi chiers sur un ordinateur Windows Installer sur l’ordinateur les logiciels fournis avec l’appareil photo. Il est possible de sauvegarder les fi chiers sur l’ordinateur à l’aide d’une seule touche, d’éditer les fi chiers sur l’ordinateur, ainsi que de créer des disques.
Sauvegarde de fi chiers sur un ordinateur Windows Installation du logiciel Veuillez lire le fi chier « Contrat de licence du logiciel JVC » dans le CD-ROM d’instructions avant d’installer le logiciel. Les logiciels suivants sont inclus dans le CD- ROM qui accompagne l’appareil photo.
Sélectionner la langue désirée, puis cliquer sur [OK]. Cliquer sur [Oui]. L’installation du logiciel commence. Cliquer sur [Terminer]. Une fois l’installation terminée Les logiciels installés s'affi chent sous [Tous les programmes]. Le dossier de destination de sauvegarde des fi chiers [MyWorks] est créé sur le disque dur qui possède le plus d'espace libre.
Sauvegarde de fi chiers sur un ordinateur Windows Une fois l’utilisation terminée Toujours suivre la procédure ci-dessous pour déconnecter l’appareil photo ou pour éteindre l’appareil photo ou l’ordinateur. Un non-respect de cette procédure peut endommager l’appareil photo et l’ordinateur. 1) Vérifi er que le voyant d’accès/recharge de l’appareil photo n’est ni allumé, ni clignotant.
Cliquer sur [EVERIO_HDD] ou [EVERIO_SD]. La procédure est terminée lorsque la barre de progression disparaît. Sauvegarde de fi chiers sur l’ordinateur sans utiliser les logiciels Préparation : Connecter l’appareil photo à l’ordinateur à l’aide du câble USB. ( p. 25) Sur l’ordinateur, créer un dossier pour y sauvegarder les fi...
Autres opérations sur un ordinateur Windows Obtenir plus des logiciels Pour plus d’informations sur l’utilisation des logiciels, voir les tutoriels des programmes respectifs ou les guides de l’utilisateur. PowerCinema NE for Everio Cliquer deux fois sur l’icône PowerCinema NE for Everio. Lancer PowerCinema NE for Everio.
Structure des dossiers et extensions Support d’enregistrement [DCIM] [XXXJVCSO] [XXXJVCSO] [XXXJVCSO] [SD_VIDEO] [MGR_INFO] [PRGXXX] [PRGXXX.PGI] [MOVXXX.MOD] [MOVXXX.MOI] [PRGXXX] [PRGXXX] [EXTMOV] [MOV_XXX.MOD] [DEM_XXX.MPG] [MISC] [PRIVATE] * Informations telles que la date et l’heure d’enregistrement, stockées avec le fi chier vidéo. Extensions Fichiers vidéo Fichiers de photos Sous Windows...
Sauvegarde de fi chiers sur un ordinateur Macintosh Vous pouvez sauvegarder les fi chiers de l’appareil photo sur l’ordinateur. Confi guration système requise Matériel : L'ordinateur Macintosh doit être équipé d'un connecteur USB 2.0 Système d’exploitation : Mac OS X (v10.3.9, v10.4.2 à v10.4.10) Connexion de l’appareil photo à...
Sauvegarde de fi chiers sur un ordinateur Macintosh Préparation : Connecter l’appareil photo à l’ordinateur à l’aide du câble USB. ( p. 30) Sur l’ordinateur, créer un dossier pour y sauvegarder les fi chiers. Ouvrir l’écran LCD pour allumer l’appareil photo. Sur l’appareil photo, sélectionner [LECTURE SUR PC].
L’utilisation de ces logiciels est autorisée selon les termes de la licence des logiciels. Préparer les informations suivantes avant de contacter l’agence ou le bureau JVC local le plus proche concernant ces logiciels (se reporter au réseau de service après-vente mondial JVC à...
Si le problème n’est pas résolu, réinitialiser l’appareil photo. ( • Si le problème subsiste, consulter le revendeur JVC le plus proche. Pour réinitialiser l’appareil photo 1) Fermer l’écran LCD pour éteindre l’appareil photo, puis retirer la source d’alimentation (batterie ou adaptateur secteur) de l’appareil, et la replacer.
Dépannage Problème La mise au point ne s’effectue pas automatiquement. La vitesse de prises de vue en rafale est lente. Aucune lecture ne peut être réalisée. Pendant l’enregistrement vidéo, l’indicateur clignote. Il est impossible de supprimer des fi chiers. Le traitement des données est trop lent lorsque l’appareil est allumé...
Messages d’avertissement Indication (Indicateur de batterie) REGLER DATE/HEURE ! VERIFIER COUVRE- OBJECTIF ERREUR DISQUE DUR ! ERREUR CARTE MEMOIRE ! ERREUR DE FICHIER DE GESTION VIDEO UNE RESTAURATION EST REQUISE RESTAURER ? ERREUR D ENREGISTREMENT DISPOSITIF USB NON PRIS EN CHARGE OU HORS TENSION LA DETECTION DE CHUTE A FONCTIONNE...
Spécifi cations Appareil photo Général Alimentation 11 V CC (en utilisant l’adaptateur secteur) 7,2 V CC (en utilisant la batterie) Consommation [GZ-MG467] Environ 3,2 W* [GZ-MG360/335/330] Environ 2,7 W* * Lorsque l’éclairage LED est éteint et l’éclairage de l’écran est réglé sur le mode [STANDARD].
Page 77
Télécommande Alimentation 3 V CC Autonomie de la pile Environ 1 an (selon la fréquence d’utilisation) Portée Moins de 5 m Durée d’enregistrement (minutes) approximative (vidéo) Support d’enregistrement Qualité ULTRA FIN NORMAL ECONOMIE GZ-MG335/330 * GZ-MG467/360 [GZ-MG467] Nombre approximatif d’images qu’il est possible d’enregistrer (photos) Support d’enregistrement Taille/qualité...
à une prise de secteur différente du standard national américain C73, utiliser un adaptateur de prise nommé comme indiqué ci-dessous. Pour cet adaptateur de prise secteur, consulter votre revendeur JVC le plus proche. Batteries La batterie fournie est une batterie au lithium- ion. Avant d’utiliser...
Page 79
Si un enfant utilise l’appareil, un adulte doit être présent. Des changements ou modifi cations non approuvés par JVC peuvent annuler le droit de l’utilisateur de faire fonctionner l’appareil. Cet appareil a été testé et il a été reconnu qu’il se conforme aux limites concernant l’appareillage...