Copying/Moving Still Image Files - JVC GZ-MG30U Instructions Manual

MANAGIN5 FILES EN
41
_ Copying/Moving Still Image Files n
You can copy or move still image files between
the built-in hard disk (HDD) and SD card using
the on-screen display.
Before proceeding to following steps,
• Make sure that SD card is inserted in the SD
slot.
• Make sure that enough free space is left in the
copy/move destination medium.
1 Set the power switch to _ or _.
2 Press MENU. The menu screen appears.
3 Press A/v to select [REC MEDIA
SETTING], then press I_11.
4 Press ^/v to select [COPY/MOVE], then
press I_11.
5 Press A/v to select [COPY] or [MOVE],
then press I_11.
COPY: Files are copied to the destination
medium while leaving original files in the source
medium.
MOVE: Files are moved to the destination
medium while deleting original files (except
read-only files) in the source medium.
6 Press < / > to select the direction of copy/
move, then press v. (HDD _ SD or
SD _ HDD)
To copy or move by selecting files
7
Press </> to select [FILE], then press I_11.
• The index screen appears.
8 Press /,, /v / < / > to select a desired file,
then press I_11.
• The check mark ([_) appears on the selected file.
• To select other files, repeat this step.
• The scroll bar can also be used with the zoom
lever and z,,/v. ( pg. 30)
9 Press MENU to return to the previous screen.
10 Press ^/v to select [EXECUTE], then
press I_11.
1 1 File transfer starts.
• To stop the file transfer, press I_11, then select
[EXECUTE] and press I_11.
1 2 When [COPYING [MOVING]
COMPLETED] appears, press I_11 to finish the
operation.
To copy or move all still image files in the
recording medium
7 Press </> to select [ALL].
8 Press A/v to select [EXECUTE], then
press I_11.
• If you want to cancel, select [CANCEL], then
press I_11.
9 File transfer starts.
• To stop the file transfer, press I_11, then select
[EXECUTE] and press I_11.
10 When [COPYING [MOVING]
COMPLETED] appears, press I_11 to finish the
operation.