Setting The Clock; Operation - Frigidaire FPGF3685LSA Use & Care Manual

SETTING THE CLOCK
Note: The time of day must first be set in order to
SETTING SILENT CONTROL OPERATION
The DELAY START pad control the Silent Control
operation feature. When choosing a function, a beep
will be heard each time a pad is pushed. If desired, the
control can be programmed for silent operation.
The SET CLOCK pad is used to set the clock. The clock
may be set for 12 or 24 hour time of day operation.
The clock has been preset at the factory for the 12 hour
operation. When the range is first plugged in, or when
the power supply to the range has been interrupted, the
timer in the display will flash.
To set the clock
1. Press Set Clock pad once (do not hold pad down).
2. With in 5 seconds, push and hold the Up or Down
arrow pad until the correct time of day appears in
the display.
3. Press Set Clock pad to accept the new time of day.
If Set Clock pad is not pressed, the timer will return
automatically to the new time of day after 7 seconds.
The clock cannot be changed during any bake, timed
bake, delayed time bake, clean cycle, speed clean or
CHANGING BETWEEN 12 OR 24 HOUR
TIME OF DAY DISPLAY
1. Press and hold SET CLOCK for 7 seconds.
2. After 7 seconds, "12h" or "24h" will appear in the
display and the control beep once.
3. Press Up or Down arrow pad to switch between the
12 and 24 hour time of day display. The display will
show either "12h" or "24h".
4. Wait 5 seconds or press CANCEL pad to return to the
time of day display.
5. Reset the correct time as described in To set the
Clock above. Please note that if the 24 hour time
of day mode was chosen, the clock will now display
time from 0:00 through 23:59 hours.
To tell if your oven is set for normal or silent operation
push and hold Start Time pad for 7 seconds. %= ==" or
"SP" appears in the display. Within 5 seconds, press
the Up or Down arrow pad to switch between normal
sound operation and silent operation mode. The display
will show either %= ==" or "SP". Wait 5 seconds to return
to normal operating mode
If"SP" appears, the control will operate with the normal
sounds and beeps. If %=" appears, the control is in silent
operation mode.
SETTING TEMPERATURE DISPLAY =
FAHRENHEIT OR CELSIUS'
The BROIL pad controls the Fahrenheit or Celsius
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to display
in Fahrenheit. The oven can be programmed to bake for any
temperature from 170°F to 550 ° (77°C to 288°C).
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. Press and hold BROIL pad for 7 seconds until "F" or
"C" appears in the display.
2. Press Up or Down arrow pad to change between
Fahrenheit or Celsius display modes.
3. Wait 5 seconds or press CANCEL pad to accept the
changes.
SETTING LOCKOUT FEATURE
The control can be programmed to lock the oven door
and oven control pads. The oven lockout feature prevents
the oven from being accidentally turned ON. It does not
disable the clock, Minute Timer or the interior oven lights.
To set control for oven lockout feature
1. Press and hold CANCEL for 3 seconds. The door
locked indicator light will flash and the motor driven
door lock will begin to close automatically. DO
NOT open the oven door while the indicator light is
flashing. Allow about 15 seconds for the oven door to
lock. Once the oven door is locked, "Loc" will appear
in the display.
2. To cancel the oven lockout feature, press CANCEL
pad and hold for 3 seconds. The control will unlock the
oven door and resume normal operation.