Jenn-Air WW27110 Use And Care Manual page 34

If oven baking results are less than expected:
• the pans being used may not be of the size or material recommended for best
results.
• there may not be sufficient room around sides of the pans for proper air circulation
in the oven.
• check instructions for preheating, rack position and oven temperature.
If baking results differ from previous oven:
• oven thermostat calibration may differ between old and new ovens. Follow recipe
and use and care directions before catling for service since the calibration on the
previous oven may have drifted to a too high or too low setting. (See pp. 32-33 -
Adjusting Oven Temperature.)
If F plus a number appears in the Display:
• a fault code is being shown. When a fault code appears and a continuous beep
sounds, touch the Cancel Off Pad. If the fault code reappears, disconnect power
to the oven and call an authorized Jenn-Air Service Contractor.
35