Table of Contents
Advertisement
Available languages
Available languages
ICE MAKERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow
instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce
the risk of fire, electric
shock,
or injury when
using your
ice maker,
follow
these
basic
precautions:
•
Plug into a grounded 3 prong outlet.
•
Do not remove ground prong.
•
Do not use an adapter.
•
Do not use an extension cord.
•
Disconnect
power before cleaning.
•
Disconnect
power before servicing.
•
Replace all parts and panels before operating.
•
Use two or more people to move and install ice maker.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
•
Cordless drill
•
Masking tape
•
Phillips screwdriver
•
Tape measure
•
Router or planer
•
Towel or piece of
cardboard
•
Pencil
PARTS NEEDED:
Custom Overlay Door Panel--See
"Custom Panel Installation
Instructions,"
#8 x 1/2" pan head wood screws (8)
PARTS SUPPLIED:
•
Adhesive pads (4)
If you plan to install a custom overlay panel, you will need to
make the panel yourself or consult a qualified cabinetmaker
or
carpenter.
IMPORTANT:
•
The thickness of the overlay panel must be 3/4" (1.91 cm).
•
Overlay panel must not weigh more than 8 Ibs (3.62 kg).
•
Overlay panels weighing more than recommended
may
cause damage to your ice maker.
•
Match wood grain direction with that of adjacent
cabinets.
•
Sand panel edges to provide a smooth finish.
•
Use moisture sealer on both sides and all edges of the
panel to avoid damage from moisture.
Advertisement
Table of Contents
