Advertisement
Available languages
Available languages
Se f-C ean
Oven
• tt is normal for parts of the oven to become hot during a
self-cJean cycle.
- To prevent damage to oven door. do not attenl pt to open
the door when the LOCK icon is displayed
, A\oid touching door. window or oven vent area during a
clean cycle.
- Do not use commercial oven cleaners on the oven finish
or around any part of the oven. They wiii damage the
finish or parts.
The self-clean cycle uses above-normal cooking temperatures to
automatically clean the oven interior.
It is normal for flare-ups, smoking, or flaming to occur during
cleaning if the oven is heavily soiled. It is better to clean the oven
regularly rather than to wait until there is a heavy build-up of soil
in the oven.
During the cleaning process, the kitchen should be well venti-
lated to get rid of normal odors associated with cleaning.
Before
Seff-Cmeaning
1. Remove broiler pan, all pans, and oven racks from the oven.
The oven racks will discolor and may not slide easily after a
self-clean cycle if they are not removed.
2. Clean oven frame, door frame (area outside of gasket, and
around the opening in the door gasket} with a nonabrasive
cleaner such as Bon AmF or detergent and water. The self-
cleaning process does not clean these areas. They should be
cleaned to prevent soil from baking on during the clean cycle.
(The gasket is the seal around the oven door and window}.
3. To prevent damage, do not clean or
rub the gasket around the oven door.
The gasket is designed to seal in heat
during the clean cycle.
4. Wipe up excess grease or spiiiovers
from the oven bottom. This prevents
excessive smoking, flare-ups or fiam-
2.
ing during the clean cycle. To make cleaning easier, the
heating element can be lifted slightly (about 1 inch}.
3.
5. Wipe up sugary and acidic spiiiovers such as sweet potatoes,
tomato, or milk-based sauces. Porcelain enamel is acid-
4.
resistant, not acid-proof. The porcelain finish may discolor if
acidic or sugary spills are not wiped up before a self-clean
cycle.
To set Self-Clean:
_otes:
, Oven temperature must be below 400° F to program a
clean cycle.
,
In double wall oven models, only one oven can be
cleaned at a time.
1. Close the oven door.
.....
,
2. Press the Clean pad.
Clean
}
, The CLEAN icon flashes.
, "SET" flashes in the display.
3. Press the Autoset pad.
Autoset )
\
, "MEd" (Medium Soil, 3 hours} is displayed.
4. Press the Autoset pad to scroll through the self-cleaning
settings.
"HVy" (Heavy Soil, 4 hours}
"MEd" (Medium soil, 3 hours}
"L[TE" ( Light Soil, 2 hours}
Choosing the soil level of the oven automatically programs
the self-cleaning time.
5. After four seconds, the oven wiil start cleaning.
, [f the door is not closed, beeps wiil sound and 'door' wiil
display. [f the door is not closed within 30 seconds, the
self-cleaning operation wiil be canceled and the display
wiil return to the time of day.
, The CLEAN icon wiil appear in the display.
, The LOCK icon wiil flash in the display. Once the
door locks, the icon wiil remain steady.
, The cleaning time wiil start counting down in the display.
To Delay a Self-Clean
Cycle:
........... \
1. Press the Delay or delay 1 pad (select models} ( Delay ,
° The DELAY icon flashes.
° 00:00 will flash in the display.
Delay
1
Enter the amount of time you want to delay the
cycle using the appropriate number pads.
Press the Clean pad ................
Clean
° SET flashes in the display.
Press the Autoset pad.
.............. \
( Autoset
, "LITE" (Light soil level} is displayed.
* Brand names for cleaning products are registered trademarks of the respective manufacturers,
15
Advertisement
