Advertisement
b. Ifthe walkingbelthasshiftedtothe right,firstremove thekey
andUNPLUG THEPOWER CORD. U sing theallenwrench, t urn
the leftadjustment boltcounterclockwise 1/4of a turn.Plugin
the powercord,insert t hekeyandrunthetreadmill fora few
minutes. R epeat u ntilthewalking beltiscentered.
5. SYMPTOM: THE HEART RATE MONITOR DOES NOT FUNCTION PROPERLY
a. If the heajtmte
monitor does not function properly, refer to HEART RATE MONITOR TROUBLE-
SHOOTING
on page 6.
b. If the heart rate monitor still does not function properly, the battery should be
changed. To replace the battery, locate the battery cover on the back of the sen-
sor unit. Insert a coin into the slot in the cover and turn the cover counterclock-
wise to the "open" position. Remove the cover.
Remove the old battery from the sensor unit. Insert a new battery, making sure
that the writing is on top. In addition, make sure that the rubber gasket is in place
in the sensor unit. Replace the battery cover and turn it to the closed position.
Q
I
6. SYMPTOM:
AN ERROR CODE (El, E20, E21, E22, E23, OR E24) APPEARS ON THE CONSOLE
a. If an error code appears, remove the key from the console, wait for a moment, and then reinsert it. If the
error code appears again, call our Customer Service Department. Do not use the treadmill until the problem
is corrected.
19
Advertisement
