Kenmore 415.23666310 Use & Care Manual page 30

Insert ends of Warming Rack pivot wire into holes in sides of gril lid. Insert ends of Warming
Rack leg wires into holes in sides of firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back.
If pivot and leg wires are on top, Warming Rack is installed upside-down.
Leg Wire
Unscrew ignitor button and nut from electronic ignition module. Attach electronic ignition
module on right shelf fascia with the nut. Insert one AA battery into electronic ignition
module, negative (-) end first. Replace ignitor button (A).
Behind right side fascia, attach side burner ignitor wire and main burner ignitor wire to
electronic ignition module (B).
Main burner
ignitor wire
30"464323313