Kenmore 415.23667310 Use & Care Manual page 25

Remove the two factory-attached screws and washers from the side burner valve bracket (A).
Use the same screws and washers to attach the side burner bezel and valve bracket to the side
shelf fascia (A). Press side burner control knob onto valve stem (A).
Place side burner into shelf (B). Fit burner tube over valve (C). Fit stud on burner bottom into
small hole in burner drip pan (B). Under drip pan, secure stud with wing nut (C).
Make sure valve is secure within burner tube. Hook venturi clip to hole in burner tube and
around manifold (C).
Valve stem
Side burner
Side
Side burner
drip pan
Wing Nut
Qty. 1
Venturi Cli
464323113 " 25