Kenmore 415.23667310 Use & Care Manual page 18

Left side
panel
Place left side panel upside down. Insert Caster Pin into the caster mounting plate to lock
caster in place for tightening, shown A. Spin the caster clockwise into the threads on the legs
of left side panel until secure. Remove Caster Pin and repeat above to install casters on right
side panel. Make sure the two locking casters are secured at the rear and the non-lock casters
are secured at the front. After all 4 casters are secured save the Caster Pin for future caster
removal or attachment.
Locking caster
I
I
I
I
I
I
Non-locking caster
Locking caster
Front
Rear
Rear
Caster
Front
Right side panel
(with large hole
near front)
Caster pin
Attach bottom shelf to left and right side panel with four 1/4-20xl/2" screws.
Left side
panel
1/4-20xl/2" Screw
Qty. 4
Screw
Bottom shelf
Note: Tank hole
must be near right
side panel.
Right side panel
(with large hole
near front)
18 "464323113