Other Features - Haier HLF103Q User Manual

Rack Dry cycle
1, Press any button except "Off" button to power on
2, Press "Timed-Dry Cycles" button and select "Rack Dry" cycle
After powering on, press "Timed-Dry Cycle" button to select "Rack Dry" program.
3, Press "More Time" And "LessTime" buttons to set a suitable time
* After setting "Timed-Dry Cycle" to "Rack Dry", you can press these two buttons to
increase or decrease drying time as you desires.
4-7, Press buttons "Temp", "Signal", "Wrinkle saver", and "Touch
Up" to define your desired program
* Notes: For "Rack Dry" program, use of buttons "Temp", "Signal", "wrinkle
Saver" and "Touch up" is the same as for auto-programs. "Sensor Dry Level" is
here inactive, pressing of which will get alarms.
8, Press "Start/Pause" button
Other Features
Your dryer atso has the following features for your convenience:
Lint Filter:
• All dryers come with a lint filter that needs to be cleaned before or after
eve_/use (read Careand CleaningGuide Section).
Leveling Legs:
• Your dryer has four leveling legs which are located in the front and rear
corners of your dryer. After instatlingyour dryer in its final position,
you can level your dryer.
• Leveling tegs can be adjusted by turning them clockwise to raise your
dryer or by turning them counterclockwise to lower your dryer.
11