Rack Dry Cycle; Other Features - Haier HLF11PC - 06-04 User Manual

English

Rack Dry Cycle

1. Press "Power On/Off" button to power on.
2. Press "Timed/Cycles" button and select "Rack Dry" cycle.
3. Press "More Time" and "Less Time" buttons to set a suitable dry time.
4-7. Press buttons "Temp," "Cycle Signal," "Delay Start," and "Wrinkle Care,"
to define your desired program.
Note: For "Rack Dry" program, use of buttons "Temp," "Cycle Signal,"
8. Press "Start/Pause" button

Other Features

Your dryer also has the following features for your convenience:
Lint Filter:
• All dryers come with a lint filter that needs to be cleaned before or after every
use (read Care and Cleaning Guide Section).
Leveling Legs:
• Your dryer has four leveling legs which are located in the front and rear cor-
ners of your dryer. After installing your dryer in its final position, you can level
your dryer.
• Leveling legs can be adjusted by turning them clockwise to lower your dryer
or by turning them counterclockwise to raise your dryer.
Note: It is very important that you level your dryer to prevent it from
11
"Delay Start," and "Wrinkle Care" is the same as for
auto-programs. "Dryness Level" is here inactive, pressing of
which will get alarms.
moving during operation.