Unpacking Your Washer - Haier XQG50-QF800 User Manual

Unpacking
Your
Appliance
• Remove allpacking materialsincludingtransportation boltsand brackets, AIso
remove adhesive tape holding the accessoriesinsideand outside,
• Inspectand remove any remains of packing, tape or printedmaterialsbefore
using thewasher,
• Remove 2 bolts, 4 screws and 1 center boltholding metal bracket from the back
of the unit that are installed to protect drum and internal components from dam-
age during shipping. (Wrench is included in the instruction manual bag)
• Screws and Bolts must be removed before using the machine. Once removed,
save them so when moving you can reinstall to protect the machine from damage
during shipping.
• Once you remove the bracket, reinstall bracket screws, center bolt and plastic
plug to prevent damage to the machine,
Bracket
Center bolt
plastic plug (not shown)
Screws
Bolt
(2)
- Bolt
17