IDE HDD Block Mode
Using this function on the Integrated Peripherals menu allows your IDE hard
drive needs to support block mode. Select
the optimal number of block read/writes per sector the drive can support.
Select
[Disabled]
Press
to display the RAID Config menu.
Enter
RAID Enable
SATA 1 (A0) RAID
SATA 2 (A1) RAID
SATA 3 (B0) RAID
SATA 4 (B1) RAID
SATA 5 (C0) RAID
SATA 6 (C1) RAID
RAID Enable
Use this function to enable or
disable RAID. When RAID is
set to
[Disabled]
functions are changed to
and cannot be
Disabled
changed.
SATA x Primary/Secondary When
you can enable or disable the various SATA functions.
Press
to display the USB Config menu.
Enter
OnChip USB
USB Keyboard Support
USB Mouse Support
OnChip USB
Use this function to enable specific versions of the USB or disable the onchip
USB. When the onchip USB is set to
support functions are set to
and cannot be
V1.1+V2.0
changed. Versions that can
be selected are
[V1.1+V2.0]
if your drive does not support block mode.
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
SATA 1 (A0) RAID
x
SATA 2 (A1) RAID
x
SATA 3 (B0) RAID
x
, all SATA
SATA 4 (B1) RAID
x
SATA 5 (C0) RAID
x
SATA 6 (C1) RAID
x
RAID Enable
[V1.1+V2.0]
[Enabled]
[Enabled]
[Disabled]
OnChip USB
USB Keyboard Support
x
USB Mouse Support
x
or
[V1.1]
to automatically detect
[Enabled]
RAID Enable
is set to
, the keyboard and mouse
.
[Disabled]
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
,
[Enabled]
[Disabled]
Enabled
Enabled