Cpu Multiplier - EVGA nForce 132-YW-E180 User Manual

CPU Freq, MHz

This value is set by the CPU Multiplier (value cannot be changed by the user).
FSB Reference Clock. MHz

This value is set by the system (value cannot be changed by the user). To
change the SLI-Ready memory, FSB memory, and memory timing, go to the
FSB & Memory screen.

CPU Multiplier


This value changes the CPU Frequency value depending on the value you
choose. Use the
The options are from 6 X through 60 X.
PCIe 16_1, MHz & PCIe
 x
Use the
Page Up
options for the PCI Express Bus, Slot 1 (the black slot closest to the CPU)
and Slot 2 (the black slot farthest from the CPU). Note that as you go higher
in value,
PCIe Spread Spectrum(SPP)
from this status.
PCIe 16_3, MHz
 x
Use the
Page Up
options for the PCI Express Bus, Slot 3 (the blue slot in the middle).
SPP< >MCP Ref Clock, MHz
—

Use the
Page Up
options for the reference clock between the SPP chip and the MCP chip.
nForce SPP
— —

Use the
Page Up
options and set the link speed from the SPP chip to the MCP chip. Values are
through
[1 x]
nForce MCP <

Use the
Page Up
options and set the link speed from the MCP chip to the SPP chip. Values are
through
[1 x]
and
Page Up Page Down
16_2, MHz
x
and keys to scroll through the frequency
Page Down
and keys to scroll through the frequency
Page Down
and keys to scroll through the frequency
Page Down
> nForce MCP
and keys to scroll through the HT multiplier
Page Down
[5 x].
nForce SPP
— —
and keys to scroll through the HT multiplier
Page Down
.
[5 x]
keys to scroll through the options.
is disabled and cannot be changed